Home About Us Products Services Contact Us
 
Mission & Values
Company Profile
Shipyard & Warehouse
Bunkering Locations
Quality Assurance
Our Strength
 
Quality Assurance (Diesel Euro 2M)
 
PROPERTIES GUARANTEED LEVEL TEST METHOD
MINIMUM MAXIMUM
Colour (ASTM) - 1.5 MS 2010 / ASTM D1500 / D6045
Ash, Mass % - 0.01 MS 2013 / ASTM D482
Cloud Point, °C - 19.0 ASTM D2500 / D5772
Flash Point, °C 60 - MS 686 / ASTM D93
Kinematic viscosity at 40°C, mm² / s 1.5 5.8 MS 1831 / ASTM D445
Copper corrosion ( 3 h at 100°C ) - 1 MS 787 / ASTM D130
Water by distillation, vol % - 0.05 MS 1800 / ASTM D6304 / D95
Sediment by extraction, wt % - 0.01 MS 790 / ASTM D473
Carbon residue on 10% bottoms, wt % - 0.20 MS 962 / ASTM D189 / D4530
Density at 15°C, kg/L 0.810 0.870 MS 1893 / ASTM D1298 / D4052
Acid number, mgKOH/g - 0.25 MS 2011 / ASTM D664 / D974 / D2624
Electrical conductivity, pS/m 50 - MS 1889 / ASTM D2624
Centane index 49 - MS 1890 / ASTM D976 / D4737
Centane number 49 - MS 1895 / ASTM D613 / D6890 / IP498
Physical distillation at 95% recovered volume °C - 370 MS 563
Simulated distillation at 95% recovered mass °C - 399 ASTM D2887 / D86
Total sulphur, mg/kg - 500 MS 1891 / ASTM D4294 / D2622 / D5453 / D7039 / D5950
Lubricity, µm - 460 MS 1892 / ASTM D6079
APPLICATION PRECAUTION SPECIFICATION
For Self-Ignition compression diesel engine. PETRONAS Diesel is a high cetane index fuel designed for use in low and high speed self-ignition compression engines to provide efficient, dependable and smooth operation. It has the proper viscosity suitable for critical fuel injection systems to provide maximum protection against wear and leakage. Also suitable for industrial prupose especially for direct burning ie. boiler, furnace, dryer, etc.
- May release Hydrogen Sulfide (H2S) gas which maybe fatal.
- Combustible Hydrogen Sulfide (H2S) gas may cause irritation
- Prolonged or repeated skin
- If swallowed, DO NOT indces vomiting. May cause chemical pneumonitis

 

 

This diesel meets the following specification :
- SIRIM MS 123:2005 (AMD. 1) 3rd Revision
Diesel fuel may contain up to 5% (v/v) of Palm Methyl Ester (PME) complying with SIRIM MS 2008 and EN 14214